What are the causes of the failure of the automatic rivet machine?

In luggage, hardware, auto parts, furniture, electronics, lighting and other industries, all need to use the automatic rivet machine, it can be said that its application is quite extensive, can adapt to a variety of needs riveting process occasions. But in the use of the device, there will inevitably be some failures, for those small failures, we can solve, but only understand the cause of the failure in order to take targeted measures.

The causes of failure of the automatic rivet machine are as follows:

1. The water content of ash is high. Once the filter of buffer bin is damaged, or the drain pipe is blocked, it will lead to excessive water content in ash, slag can not be in time after the anti-washing filter elements, resulting in automatic riveting machine failure. 2. There are a lot of ash on the return part of the belt. When the sweeper scraper in the long-term use of wear, it will increase the viscosity of ash, resulting in a lot of ash with the belt surface. 3. The belt is not in its normal position. Roller group rollers in the work of abnormal or drum coating glue has been seriously worn out will lead to the belt out of the normal position, the belt in a long-term deviation, is before you can not work automatically riveting machine. 4, automatic riveting machine bearing quality is poor. Bearing is a very important part of the equipment, once the bearing quality is poor, then it is easy to lead to the operation of Cottonwood, insensitive situation. 5. Poor sealing performance of automatic riveting machine. Once sealing performance is not good, it will lead to the operation of water slag into the roller bearing, leading to equipment wear.

Can know the cause of automatic rivet machine failure there are many reasons, when the operation of equipment failure, do not panic, the first to terminate the operation, carefully check the cause of failure, do not force the operation before the failure has not been eliminated.