The rivet machine is a kind of general-purpose equipment with high safety. Its service life can be as long as ten years. If it is properly maintained, it can even be used for longer. However, in the course of use, as a result of equipment wear, aging and improper operation and other reasons, it is inevitable that there will be some failures. How to reduce the occurrence of failure? This needs to do some prevention work at ordinary times.
Below we will introduce the prevention of Rivet Machine failure measures:
1, the need for regular inspection of riveting machine parts, to ensure that the parts in the fixture to get a good positioning and support, riveting head should be matched with the equipment, the riveting materials and rivets used can meet the requirements of the riveting process, and the gap between the rivets and the rivets should be controlled within a reasonable range. 2. At the beginning of riveting, the position of the worktable should be adjusted and locked to prevent displacement during riveting. The worktable should be operated strictly according to the requirements of the operation specifications and should not be operated randomly, operation Error, it is easy to cause equipment failure. 3, the operator in the operation, should control the riveting fixture positioning work, grasp the height of the riveting, the height of the riveting should adapt to the structure of the rivets, can be appropriate to increase the fixture on the pre-pressure mechanism. 4, regular inspection of riveting machine spindle in the rotation of the noise, and pay attention to the quality of riveting is worse, if the noise is too large, poor riveting quality, it needs attention, this may be because the bearing has been damaged or worn, the need to replace the new bearing.
In addition, during the operation of the riveting machine, the need for regular inspection of the riveting head swing, if there is a problem with the riveting head, you need to stop inspection.