Advantages of automatic hydraulic riveter

Configuration of riveting press

1 hydraulic system, using well-known brand hydraulic valve set, full hydraulic drive, using high power 5.5 kw motor power. 2 external size of 915 * 1030 * 2000mm, Perfect Replacement Haag hydraulic riveter, equipment weight, about 750 kg, the maximum output pressure 0-8 tons. 3 large throat, 500cc-c rack throat, throat depth of 500MM, throat height of 440MM, to meet all the pressure riveting needs, while supporting custom. 4 fast and efficient, the total working distance is 300mm, the adjustable working distance is 180mm, the maximum working speed is 0.6 seconds per time, meeting almost all pressing and riveting work needs. The position of the lower die can be adjusted according to the requirement of the workpiece, the maximum holding time is 9.9 seconds, and the output pressure is adjusted without pole. 6 hydraulic system repeatability accuracy plus or minus 1% . 7 safety protection, micro-current recognition of metal and non-metal. 8 equipped with 10 several pressure riveting mold, mold complete, more worry-free.

Advantage

All electronic control without a relay design, the use of the latest electronic control technology, no electrical consumption. 2 independent development of the Special PLC circuit board, complete functions. 3 with maintenance point fault tips, basic problems as long as the provision of photos of the signal area, can be quickly restored. 4 intelligent anti-pressure hand function, through reducing pressure distribution head internal conductive spring not only does not affect the normal signal recognition, but also improves the non-metallic strength and sensitivity, more soft and more humanized. 5 support optional non-riveting riveting function, the perfect alternative to part of the stamping problem.